S-5N全固态重复频率脉冲发生器

 主要介绍S-5N的结构及测试实验结果。S-5N型全固态重复频率脉冲发生器是目前国际上同类源中峰值功率和平均功率均为最大的一台。随负载大小的变化，S-5N脉冲发生器的输出电压为400～600kV，输出电流2～3kA，输出脉冲半高宽40～50ns，单脉冲输出能量40～65J。 S-5N脉冲发生器在300Hz重复频率条件下可连续工作，500Hz重复频率条件下可连续工作3min，平均输出功率高达30kW。     

Radiolysis of 5,10,15,20-tetrakis(N-methyl-4-pyridyl)-porphyrin or 5,10,15,20-tetrakis(4-sulfonatophenyl)-porphyrin in aqueous solution in the presence and in the absence of DNA or human serum albumin

The reduction of two free-base ionic porphyrins: 5,10,15,20-tetrakis(N-methyl-4-pyridyl)-porphyrin (TMPyP) and 5,10,15,20-tetrakis(4-sulfonatophenyl)-porphyrin (TSPP) by the hydrated electron was studied under neutral pH in aqueous solution in the absence and in the presence of biomolecules, DNA or HSA. Pulse radiolysis studies provided the spectra of the short-lived π-radical anions and steady-state radiolysis led to formation of stable phlorin or chlorin, the products of two-electron reduction and protonation at a meso and a pyrrolic nitrogen positions or at two β-pyrrole positions, respectively. Identification of the final reduction products was based on their reactivity to molecular oxygen—the phlorin, contrary to chlorine, was oxidized rapidly by O₂ to recover the original porphyrin. The stable product of TMPyP reduction was the phlorin, whereas for TSPP the chlorine and the phlorin were obtained. Addition of biomolecules to the solution resulted in changes of the porphyrins spectroscopic properties and in the decrease in rates of the occurring reduction processes proceeding with participation of the porphyrins.     

深水多波束测深系统脉冲压缩实时算法

线性调频信号是大时宽带宽积信号,通过脉冲压缩可提高探测距离和分辨率,已在深水多波束测深系统中得到广泛应用。针对深水多波束测深系统中脉冲压缩运算量大的问题,提出了一种基于分组的脉冲压缩实时算法。该算法对需要进行脉冲压缩的波束进行分组,每个节拍只计算一组波束,可大幅减少深水多波束测深系统脉冲压缩的运算时间,节省了处理器资源。该算法已成功应用于某深水多波束测深系统,经多次海试证明,工作稳定可靠。     

A waveguide high-pass filter system for measuring the spectrum of pulsed terahertz sources

We propose a system for measuring spectra of terahertz (THz) pulses, including single pulses, which is based on high-pass filters (HPFs). The system consists of channels for measuring amplitudes of pulses (initial pulses and those transmitted via HPFs with different cutoff frequencies) and an algorithm for processing of the obtained data. The pulse spectrum is restored by using the iteration method or the amplitude–frequency method. The iteration method of spectrum restoration is applicable in the range of THz pulse durations from 10⁻⁹ s to 10⁻⁷ s. The amplitude–frequency method is applicable to THz pulses with durations exceeding 10⁻⁸ s. The system for measuring of THz pulse spectra was simulated by using the characteristics of specially developed waveguide HPFs. The relative simulation error of determining the central frequency by the amplitude–frequency method is equal to 2 · 10⁻⁶ for THz pulse durations of 10⁻⁵ s and longer.     

用于水中有机磷农药检测的离子迁移率谱仪预富集进样方法

建立了检测水中有机磷农药的离子迁移率谱仪预富集进样方法。预富集器由表面覆盖有吸附薄膜的微热板、聚四氟乙烯电路板和管座组成,具有操作简单,无需有机溶剂,自加热,热容小,功耗低等优点。以马拉硫磷检测为例,分析了富集器解吸升温速率和离子迁移率谱仪半透膜温度对检测结果的影响。采用高温短时脉冲加热和低温维持加热相结合的解吸方式,既可形成较高的进样浓度脉冲,又可减少进入漂移管的杂质,有利于提高离子迁移率谱仪检测灵敏度。实验表明:采用所述预富集及两阶段加热解吸进样方法,对水中马拉硫磷的检出限为3.9μg/L,达到了国家标准对水中有机磷检测的要求。     

Laser drilling of stainless steel with nanosecond double-pulse

Nanosecond double-pulse laser drilling is reported in this paper. The double-pulse herein represents two closely conjoint pulses with 21 ns pulse duration and about 52 ns interpulse separation, which are acquired by temporal pulse shaping. Percussion drilling with such double-pulse is performed in stainless steel samples with different laser fluences, sample's thickness, repetition rates and ambient pressures. The experimental results show that the drilling rates of double-pulse drilling are more than one order of magnitude higher than that of conventional single-pulse drilling in air. Differences in the processing results between single-pulse and double-pulse with various processing parameters are investigated. In addition the ablation mechanisms of the double-pulse drilling are discussed.     

基于SOS的脉冲功率源技术新进展

 研制了基于SOS的胡杨200和胡杨700脉冲功率源。给出了胡杨200和胡杨700的电路原理、组成结构和实验波形。介绍了在SOS脉冲功率源上开展的高重复频率强流电子束产生、长寿命阴极实验、绝缘介质的高重复频率击穿实验和低引导磁场无箔二极管等实验研究进展。经测试，胡杨200在2 kHz重复频率、负载阻抗200 Ω下，输出电压200 kV，脉冲宽度约35 ns，平均输出功率大于10 kW；在300 Hz条件下可连续运行。胡杨700同样为全固态脉冲功率源，其设计指标:输出电压700 kV，电流5 kA，脉冲宽度约40 ns；经初步调试在150 Ω电阻负载上单脉冲输出指标达到660 kV，4.4 kA，脉宽约70 ns。     

测量脉冲大电流的四光路光学电流传感器技术

 在传统光学电流传感器技术的基础上，提出了一种四光路光学电流传感器，其通过四路输出信号可准确确定偏转角，使电流的测量范围不受正弦函数的单调性的限制，从而提高了电流的测量范围。配合四光路结构，提出了新的反正切函数数据处理方法，其不存在角度不灵敏区、可纠正原始数据的缺陷，从而提高了测量精度。实测了充电电压为4.5 kV、电容为50 μF和导线有效穿过磁光探头14次的快开快门的总短路电流，其峰值达85 kA，与理论值87 kA能较好地吻合，从而证明了四光路光学电流传感器可有效地测量脉冲大电流。     

MOSFET调制器的实验研究

 介绍了MOSFET调制器的基本原理，并对其并联分流和感应叠加两种开关结构进行了实验研究。基于可编辑逻辑器件设计了其触发电路，驱动电路采用高速MOSFET对管组成的推挽输出形式，加快了MOSFET的开关速度。利用Pspice软件对开关上有无剩余电流电路(RCD)两种情况进行仿真，结果表明，加装RCD电路可以有效吸收MOSFET在关断瞬间产生的反峰电压。实验中，电流波形用Pearson线圈测量，用3个MOSFET并联作开关，当电容充电电压为450 V，负载为30 Ω时，脉冲电流13 A，前沿20 ns，平顶约80 ns；用3个单元调制器感应叠加，当电容充电电压为450 A，负载为30 Ω时，脉冲电流强度为40 A，前沿25 ns，平顶约70 ns。     

快脉冲直线变压器驱动源模块的原理及实验

 介绍了直线型变压器驱动源（LTD）产生快脉冲的基本原理及技术优势，阐述了快脉冲LTD模块设计的要点，设计了输出脉冲上升时间小于100 ns的快脉冲LTD模块，并进行了初步的实验研究。实验得到该LTD模块充电±16 kV时，短路放电的电流峰值为23.7 kA，电流振荡1/4周期为69.6 ns；充电±50 kV驱动0.85 Ω负载时，电流峰值为41.4 kA，上升时间为36.8 ns（10%~90%）和60.8 ns（0~100%）。